The knife mill HM100 is used for process the soft ,medium-hard, brittle and fibrous sample. Special for high water, oil or fat content sample.
The HM100 has two-blade knives at the center of the bottom of a grinding cup. A certain height gap is kept between such knives. Driven by a motor of 1,100W, the knife start rotating. Reliable crushing and homogeneous phase effects are generated via the cutting of the sharp steel knife edges. As per the rotating directions, the blunt side can be selected for coarse grinding of bulk samples or the tough side can be selected for fine grinding of samples. The motor speed is electronically controlled and can be preset. The constant speed guarantees efficient and high-quality grinding homogenization. You just need 10 to 30 seconds to process samples that are usually hard to crush and get homogenized samples for analysis.