Laboratory Oven Equipment Suppliers in Singapore for Research and Industry
Green Research Scientific is a laboratory oven equipment supplier in Singapore, distributing authorised oven ranges across research, industrial, and QC laboratories. Our range covers forced-air and natural convection drying ovens from 53 to 1000 litres, supplied with original manufacturer warranty and hands-on engineer support from our team.
• Authorised Distribution: Original oven equipment with full manufacturer warranty and traceable service records.
• Forced-Air and Natural Convection: SLW and SLN model ranges available across every configuration.
• Capacities 53 to 1000 Litres: Temperature range up to 300 °C with programmable controller options.
• In-House Engineering Team: Installation, calibration, and troubleshooting handled directly by our own engineers.
Laboratory Oven Equipment Available
Our range covers the full thermal spectrum a Singapore laboratory needs. Pol-Eko drying ovens, incubators, and climatic chambers sit alongside Powteq milling solutions and Everfuge centrifuge solution.
Drying Ovens & Incubators
Drying Ovens
Forced-air convection (SLW) and natural convection (SLN) drying ovens. Range +5°C above ambient to +300°C. Full stainless steel interior; nitrogen blow option for oxidation-sensitive applications. Smart and Smart PRO controller variants.
Key Specifications:
- Spec 1
- Spec 2
Specification and Value
- Capacity - 53 – 1,000 L
- Max temperature - 300 °C
Pol-Eko ILW / ILP / ST / CLW / ILC Series
Five incubator types covering Peltier-cooled, compressor-cooled, and CO₂ variants. Stable temperature regardless of ambient conditions.
Key Specifications:
- Spec 1
- Spec 2
Specification and Value
- Capacity - 53 – 750 L
- Temperature Range -10 °C to +100 °C
Climatic & Stability Testing and Cold Storage
Pol-Eko KK / KKP / KKS Series — Climatic Test Chambers
Combined temperature and humidity control for stability testing, accelerated ageing, and environmental simulation. Compressor, Peltier, and Phytotron (plant growth) variants. Ultrasonic and steam humidification options.
Key Specifications:
Specification and Value
- Capacity - 240 – 750 L
- Temperature Range 0 °C to 100 °C
Pol-Eko CHL Series — Lab Fridges
Full stainless steel laboratory refrigerators for controlled reagent and sample storage. Glass door and solid door options.
Key Specifications:
- Spec 1
- Spec 2
Specification and Value
- Capacity - 55 – 1,500 L
Critical Point Drying
Tousimis Cleanroom version CO2 Critical Point Dryer
CO₂ critical point drying for delicate biological, MEMS, graphene, nano-scribe printing samples, and semiconductor samples prior to SEM imaging — preserving three-dimensional structure that air drying would collapse. Chamber sizes from 1″ manual benchtop through to 8″ wafer-compatible floor-standing systems. Lifetime technical support. Tousimis: 50+ years specialisation in CPD.
Key Specifications:
- Non-Cleanroom and Cleanroom version
- Manual or Automatic version
Tousimis Non-Cleanroom CO2 Critical Point Dryer
CO₂ critical point drying for delicate biological, MEMS, graphene, nano-scribe printing samples and semiconductor samples prior to SEM imaging — preserving three-dimensional structure that air drying would collapse. Chamber sizes from 1″ manual benchtop through to 3″ tabletop systems. Lifetime technical support. Tousimis: 50+ years specialisation in CPD.
Key Specifications:
- Non-Cleanroom and Cleanroom version
- Manual or Automatic version
Industries Using Our Laboratory Ovens
Our Pol-Eko SLW and SLN ovens support precision thermal protocols across Singapore’s most demanding research and quality-testing environments, with proven applications in main core sectors below.
Battery R&D
Electrode drying, electrolyte moisture removal, and cell component conditioning at controlled temperatures.
Pharmaceutical Manufacturing
Sterilisation, sample drying, and stability testing under GMP-aligned temperature uniformity.
Food Safety
Testing Moisture content analysis, microbial load reduction, and shelf-life sample preparation.
2D & Energy Materials
Substrate annealing, solvent evaporation, and thin-film curing for graphene, MOF, and perovskite research.
Biological Research
Glassware sterilisation, media drying, and sample dehydration for microbiology and cell culture labs.
Environmental & Recycling Labs
Soil and sludge drying, ash content determination, and waste sample preparation for compliance testing.
How We Specify the Right Laboratory Oven Equipment
Most acceptance-test failures trace back to a specification set against headline figures instead of workload reality. Our engineers work through several criteria with the buyer before a quote is issued.
Chamber Size / Sample Size / Work load
Sample size and workload will determine the chamber size required
Sample Sensitivity
Forced-air recovers faster after door openings but disturbs delicate samples. Natural convection is gentler though slower to stabilise.
Atmosphere Configuration
Nitrogen-inert workflows need the SLW nitrogen blow option as a factory build, not a bolt-on accessory added later.
Audit Documentation
GMP, ISO, and HSA workflows need Smart PRO controllers with event logging and USB export from day one, not retrofitted.
Get in touch to start a specification review with our engineers, even if the requirement is only partially scoped.
Our Certifications as an Authorised Laboratory Oven Supplier
Compliance documentation follows the authorised manufacturer channels behind every oven we distribute, currently Pol-Eko, Powteq Milling Solution and Everfuge Centrifuge solutions. The panel below shows the certifications applicable across the range.
Why Organisations Source Laboratory Ovens Through GRS
Sourcing laboratory oven equipment in Singapore through an authorised distributor changes both the specification process and the support that follows delivery. Four differentiators separate us from a general catalogue reseller.
Direct Pol-Eko Distribution
Original equipment, full manufacturer warranty, no parallel imports.
Local Specification Support
Engineers walk the workload through before a quote leaves the office.
In-House Engineering Team
Installation, calibration, and troubleshooting handled by our own team.
Lifecycle Continuity
Replacement parts, firmware, and platform upgrades stay handled through one relationship.
What Happens After the Laboratory Oven Arrives
Post-delivery support runs through defined stages once the oven is delivered, with each stage covered by our in-house engineering team.
Installation & Acceptance
Engineers level, connect, and run acceptance protocols against factory specification before sign-off.
Operator Training
On-site training runs on your own samples and protocols before the oven enters daily use.
Calibration & Maintenance
Service intervals match actual usage patterns, keeping calibration windows right-sized for each site.
Long-Term Support
Replacement parts, firmware upgrades, and platform migrations handled in-house.
Frequently Asked Questions
What is the difference between forced-air and natural convection laboratory ovens?
Forced-air ovens use a turbo blower to circulate heated air, delivering faster temperature recovery and tighter uniformity across a loaded shelf. Natural convection ovens rely on passive air movement, which is gentler on heat-sensitive samples but slower to stabilise. Forced-air suits high-throughput workflows; natural convection suits delicate protocols.
What temperature range and capacity does the Pol-Eko SLW cover?
The Pol-Eko SLW forced-air drying oven covers a temperature range from ambient +5 °C up to 300 °C, with capacities from 53 to 1000 litres. Smart and Smart PRO controller options are available across the range.
Can Pol-Eko drying ovens operate under a nitrogen-inert atmosphere?
Yes. The Pol-Eko SLW is available with a nitrogen blow option as a factory configuration, suited to oxidation-sensitive workflows such as battery electrode drying. The nitrogen configuration is specified at order stage rather than added later.
Does GRS provide IQ, OQ, and PQ documentation for laboratory oven equipment?
IQ, OQ, and PQ documentation is available for regulated workflows. The specific packages supplied depend on the oven model and the audit framework (GMP, ISO 17025, or HSA). Confirm requirements during the specification review so the correct documentation is prepared before delivery.
What lead times apply when ordering a laboratory oven from GRS?
Lead times vary by product family and configuration. Standard SLW and SLN drying ovens typically move faster than custom-configured units with nitrogen options or Smart PRO controllers. Confirmed timelines are provided at quotation stage against current manufacturer availability.
Do you supply laboratory ovens through GEBIZ / Ariba procurement?
Yes. Institutional procurement through GEBIZ is supported alongside private sector purchasing across universities, research institutes, and industrial buyers. Tender responses and quotation formats are prepared to match the procurement expectations of each buyer type.
Does GRS handle calibration and preventive maintenance for laboratory ovens in Singapore?
Yes. Calibration and preventive maintenance are covered by our in-house engineering team, with service intervals matched to actual usage patterns. Calibration certificates and service logs are prepared for GMP and ISO audit workflows.
Are Pol-Eko laboratory ovens covered by manufacturer warranty?
Yes. All Pol-Eko laboratory ovens supplied through GRS carry full manufacturer warranty under authorised distribution. Warranty terms vary by model and are confirmed in writing before purchase.
Specifying a new laboratory oven or replacing an ageing unit?
Tell us your application — we’ll match the right system.
Phone
+65 9628 7255
Address
10 Raeburn Park, #02-08, Singapore 088702
Hours
Mon–Fri, 9:00 AM – 6:30 PM